Systemair SYSAQUA210.H.1P-SP.WPS.AVM
Модель: SYSAQUA210.H.1P-SP.WPS.AVM
Артикул: 370198
SysAquaL/SysAquaH 140 to 210 have been designed and optimized to operate with R410A refrigerant fluid.
They are available in cooling only (SysAquaL) and heat pump (SysAquaH) versions.
Each versions consists of 5 sizes (140, 150, 170, 190 and 210) and covers a nominal cooling capacity range from 127 to 208 kW and a nominal heating capacity range from 140 to 213kW
All units are equipped with four scroll compressors fitted in tandem for adapting to partial system loads.
The general operation status of the machine is continuously under the control of an IHM controller
The SysAquaL and SysAquaH units can operate without water tank, thanks to the IHM controller that implements an auto- adaptative control logic ensuring a total protection of the compressors at different load or water volume conditions.
The minimum water volume requested in cooling mode is 3.5 litres of buffer volume per kW.
In heating mode, 6.5 litres of buffer volume per kW are recommended in order to guarantee homogeneous temperatures during the defrosting cycles (comfort and energy savings).
A fans peed controller can be also supplied as factory-fitted option to authorize the unit to operate in cooling mode at low ambient temperature.
Systemair SYSAQUA35.H.1P-SP.WPS.AVM.T
Модель: SYSAQUA35.H.1P-SP.WPS.AVM.T
Артикул: 372036
SysAquaL/SysAquaH 25 to 125 have been designed and optimized to operate with R410A refrigerant fluid. They are of single refrigerant circuit type.
They are available in cooling only (SysAquaL) and heat pump (SysAquaH) versions.
Each versions consists of 11 sizes (25, 30, 35, 40, 45, 55, 65, 75, 90, 105 & 125) and covers a nominal cooling capacity range from 25.0 to 122 kW and a nominal heating capacity range from 26.9 to 120 kW.
All units are equipped with two scroll compressors fitted in tandem for adapting to partial system loads.
The general operation status of the machine is continuously under the control of an IHM controller.
The SysAquaL and SysAquaH units can operate without water tank, thanks to the lHM controller that implements an auto- adaptative control logic ensuring a total protection of the compressors at different load or water volume conditions. The minimum water volume requested in cooling mode is 3.5 litres per kW for application air conditioning and 10 litres per kW for application process.
In heating mode, 12.5 litres per kW are recommended in order to guarantee homogeneous temperatures during the defrosting cycles (comfort and energysavings). A fan speed controller can be also supplied as factory-fitted option to authorize the unit to operate in cooling mode at low ambient temperature.
SysAquaL and SysAquaH units can be supplied in several versions:
- STD (Standard) version : lncludes a low noise (LS) acoustical performance.
- XLN (Extra low noise) version : Obtained by the installation of acoustic box around compressors.
- HPF version : lncreases the static pressure.
Cabinet and structure
The cabinet and structure of the unit are of heavy duty galvanized steel.All galvanized steel components are individually painted by a special painting process before the assembly of the unit. This painting system performs a homogeneous protection to the corrosion.The painting is a polyester powder based type, coloured in RAL 7040.
The units SysAquaL/SysAquaH are suitable for outdoor installation, directly on the building roof or at the ground level.
Compressors
Each unit is equipped with two scroll compressors fitted on a rail and assembled together to form tandem compressors.
The compressors are then mounted on rubber pads in order to eliminate noise and vibration transmissions. The compressor motor shave a direct startup. Each motor is cooled by the refrigerant gas and is equipped with an overload protection.
A phase sequence monitor is supplied as standard.
Evaporator
The evaporator is consisting of a stainless steel plate heat exchanger insulated with closed cell synthetic foam. lt is protected by an antifreeze electric heater to ensure a good protection against freezing at low ambient temperature (-10 °C min.) when the unit is switchedoff.
Maximum working pressure is 10 bar at water side and 45 at refrigerant side.
Systemair SYSAQUA40.H.1P-SP.WPS.AVM.T
Модель: SYSAQUA40.H.1P-SP.WPS.AVM.T
Артикул: 372038
SysAquaL/SysAquaH 25 to 125 have been designed and optimized to operate with R410A refrigerant fluid. They are of single refrigerant circuit type.
They are available in cooling only (SysAquaL) and heat pump (SysAquaH) versions.
Each versions consists of 11 sizes (25, 30, 35, 40, 45, 55, 65, 75, 90, 105 & 125) and covers a nominal cooling capacity range from 25.0 to 122 kW and a nominal heating capacity range from 26.9 to 120 kW.
All units are equipped with two scroll compressors fitted in tandem for adapting to partial system loads.
The general operation status of the machine is continuously under the control of an IHM controller.
The SysAquaL and SysAquaH units can operate without water tank, thanks to the lHM controller that implements an auto- adaptative control logic ensuring a total protection of the compressors at different load or water volume conditions. The minimum water volume requested in cooling mode is 3.5 litres per kW for application air conditioning and 10 litres per kW for application process.
In heating mode, 12.5 litres per kW are recommended in order to guarantee homogeneous temperatures during the defrosting cycles (comfort and energysavings). A fan speed controller can be also supplied as factory-fitted option to authorize the unit to operate in cooling mode at low ambient temperature.
SysAquaL and SysAquaH units can be supplied in several versions:
- STD (Standard) version : lncludes a low noise (LS) acoustical performance.
- XLN (Extra low noise) version : Obtained by the installation of acoustic box around compressors.
- HPF version : lncreases the static pressure.
Cabinet and structure
The cabinet and structure of the unit are of heavy duty galvanized steel.All galvanized steel components are individually painted by a special painting process before the assembly of the unit. This painting system performs a homogeneous protection to the corrosion.The painting is a polyester powder based type, coloured in RAL 7040.
The units SysAquaL/SysAquaH are suitable for outdoor installation, directly on the building roof or at the ground level.
Compressors
Each unit is equipped with two scroll compressors fitted on a rail and assembled together to form tandem compressors.
The compressors are then mounted on rubber pads in order to eliminate noise and vibration transmissions. The compressor motor shave a direct startup. Each motor is cooled by the refrigerant gas and is equipped with an overload protection.
A phase sequence monitor is supplied as standard.
Evaporator
The evaporator is consisting of a stainless steel plate heat exchanger insulated with closed cell synthetic foam. lt is protected by an antifreeze electric heater to ensure a good protection against freezing at low ambient temperature (-10 °C min.) when the unit is switchedoff.
Maximum working pressure is 10 bar at water side and 45 at refrigerant side.
Systemair SYSAQUA45.H.1P-SP.WPS.AVM
Модель: SYSAQUA45.H.1P-SP.WPS.AVM
Артикул: 372039
SysAquaL/SysAquaH 25 to 125 have been designed and optimized to operate with R410A refrigerant fluid. They are of single refrigerant circuit type.
They are available in cooling only (SysAquaL) and heat pump (SysAquaH) versions.
Each versions consists of 11 sizes (25, 30, 35, 40, 45, 55, 65, 75, 90, 105 & 125) and covers a nominal cooling capacity range from 25.0 to 122 kW and a nominal heating capacity range from 26.9 to 120 kW.
All units are equipped with two scroll compressors fitted in tandem for adapting to partial system loads.
The general operation status of the machine is continuously under the control of an IHM controller.
The SysAquaL and SysAquaH units can operate without water tank, thanks to the lHM controller that implements an auto- adaptative control logic ensuring a total protection of the compressors at different load or water volume conditions. The minimum water volume requested in cooling mode is 3.5 litres per kW for application air conditioning and 10 litres per kW for application process.
In heating mode, 12.5 litres per kW are recommended in order to guarantee homogeneous temperatures during the defrosting cycles (comfort and energysavings). A fan speed controller can be also supplied as factory-fitted option to authorize the unit to operate in cooling mode at low ambient temperature.
SysAquaL and SysAquaH units can be supplied in several versions:
- STD (Standard) version : lncludes a low noise (LS) acoustical performance.
- XLN (Extra low noise) version : Obtained by the installation of acoustic box around compressors.
- HPF version : lncreases the static pressure.
Cabinet and structure
The cabinet and structure of the unit are of heavy duty galvanized steel.All galvanized steel components are individually painted by a special painting process before the assembly of the unit. This painting system performs a homogeneous protection to the corrosion.The painting is a polyester powder based type, coloured in RAL 7040.
The units SysAquaL/SysAquaH are suitable for outdoor installation, directly on the building roof or at the ground level.
Compressors
Each unit is equipped with two scroll compressors fitted on a rail and assembled together to form tandem compressors.
The compressors are then mounted on rubber pads in order to eliminate noise and vibration transmissions. The compressor motor shave a direct startup. Each motor is cooled by the refrigerant gas and is equipped with an overload protection.
A phase sequence monitor is supplied as standard.
Evaporator
The evaporator is consisting of a stainless steel plate heat exchanger insulated with closed cell synthetic foam. lt is protected by an antifreeze electric heater to ensure a good protection against freezing at low ambient temperature (-10 °C min.) when the unit is switchedoff.
Maximum working pressure is 10 bar at water side and 45 at refrigerant side.
Systemair SYSAQUA45.H.1P-SP.WPS.AVM.T
Модель: SYSAQUA45.H.1P-SP.WPS.AVM.T
Артикул: 372040
SysAquaL/SysAquaH 25 to 125 have been designed and optimized to operate with R410A refrigerant fluid. They are of single refrigerant circuit type.
They are available in cooling only (SysAquaL) and heat pump (SysAquaH) versions.
Each versions consists of 11 sizes (25, 30, 35, 40, 45, 55, 65, 75, 90, 105 & 125) and covers a nominal cooling capacity range from 25.0 to 122 kW and a nominal heating capacity range from 26.9 to 120 kW.
All units are equipped with two scroll compressors fitted in tandem for adapting to partial system loads.
The general operation status of the machine is continuously under the control of an IHM controller.
The SysAquaL and SysAquaH units can operate without water tank, thanks to the lHM controller that implements an auto- adaptative control logic ensuring a total protection of the compressors at different load or water volume conditions. The minimum water volume requested in cooling mode is 3.5 litres per kW for application air conditioning and 10 litres per kW for application process.
In heating mode, 12.5 litres per kW are recommended in order to guarantee homogeneous temperatures during the defrosting cycles (comfort and energysavings). A fan speed controller can be also supplied as factory-fitted option to authorize the unit to operate in cooling mode at low ambient temperature.
SysAquaL and SysAquaH units can be supplied in several versions:
- STD (Standard) version : lncludes a low noise (LS) acoustical performance.
- XLN (Extra low noise) version : Obtained by the installation of acoustic box around compressors.
- HPF version : lncreases the static pressure.
Cabinet and structure
The cabinet and structure of the unit are of heavy duty galvanized steel.All galvanized steel components are individually painted by a special painting process before the assembly of the unit. This painting system performs a homogeneous protection to the corrosion.The painting is a polyester powder based type, coloured in RAL 7040.
The units SysAquaL/SysAquaH are suitable for outdoor installation, directly on the building roof or at the ground level.
Compressors
Each unit is equipped with two scroll compressors fitted on a rail and assembled together to form tandem compressors.
The compressors are then mounted on rubber pads in order to eliminate noise and vibration transmissions. The compressor motor shave a direct startup. Each motor is cooled by the refrigerant gas and is equipped with an overload protection.
A phase sequence monitor is supplied as standard.
Evaporator
The evaporator is consisting of a stainless steel plate heat exchanger insulated with closed cell synthetic foam. lt is protected by an antifreeze electric heater to ensure a good protection against freezing at low ambient temperature (-10 °C min.) when the unit is switchedoff.
Maximum working pressure is 10 bar at water side and 45 at refrigerant side.
Systemair SYSAQUA55.H.1P-SP.WPS.AVM
Модель: SYSAQUA55.H.1P-SP.WPS.AVM
Артикул: 372041
SysAquaL/SysAquaH 25 to 125 have been designed and optimized to operate with R410A refrigerant fluid. They are of single refrigerant circuit type.
They are available in cooling only (SysAquaL) and heat pump (SysAquaH) versions.
Each versions consists of 11 sizes (25, 30, 35, 40, 45, 55, 65, 75, 90, 105 & 125) and covers a nominal cooling capacity range from 25.0 to 122 kW and a nominal heating capacity range from 26.9 to 120 kW.
All units are equipped with two scroll compressors fitted in tandem for adapting to partial system loads.
The general operation status of the machine is continuously under the control of an IHM controller.
The SysAquaL and SysAquaH units can operate without water tank, thanks to the lHM controller that implements an auto- adaptative control logic ensuring a total protection of the compressors at different load or water volume conditions. The minimum water volume requested in cooling mode is 3.5 litres per kW for application air conditioning and 10 litres per kW for application process.
In heating mode, 12.5 litres per kW are recommended in order to guarantee homogeneous temperatures during the defrosting cycles (comfort and energysavings). A fan speed controller can be also supplied as factory-fitted option to authorize the unit to operate in cooling mode at low ambient temperature.
SysAquaL and SysAquaH units can be supplied in several versions:
- STD (Standard) version : lncludes a low noise (LS) acoustical performance.
- XLN (Extra low noise) version : Obtained by the installation of acoustic box around compressors.
- HPF version : lncreases the static pressure.
Cabinet and structure
The cabinet and structure of the unit are of heavy duty galvanized steel.All galvanized steel components are individually painted by a special painting process before the assembly of the unit. This painting system performs a homogeneous protection to the corrosion.The painting is a polyester powder based type, coloured in RAL 7040.
The units SysAquaL/SysAquaH are suitable for outdoor installation, directly on the building roof or at the ground level.
Compressors
Each unit is equipped with two scroll compressors fitted on a rail and assembled together to form tandem compressors.
The compressors are then mounted on rubber pads in order to eliminate noise and vibration transmissions. The compressor motor shave a direct startup. Each motor is cooled by the refrigerant gas and is equipped with an overload protection.
A phase sequence monitor is supplied as standard.
Evaporator
The evaporator is consisting of a stainless steel plate heat exchanger insulated with closed cell synthetic foam. lt is protected by an antifreeze electric heater to ensure a good protection against freezing at low ambient temperature (-10 °C min.) when the unit is switchedoff.
Maximum working pressure is 10 bar at water side and 45 at refrigerant side.
Systemair SYSAQUA75.H.1P-SP.WPS.AVM.T
Модель: SYSAQUA75.H.1P-SP.WPS.AVM.T
Артикул: 372046
SysAquaL/SysAquaH 25 to 125 have been designed and optimized to operate with R410A refrigerant fluid. They are of single refrigerant circuit type.
They are available in cooling only (SysAquaL) and heat pump (SysAquaH) versions.
Each versions consists of 11 sizes (25, 30, 35, 40, 45, 55, 65, 75, 90, 105 & 125) and covers a nominal cooling capacity range from 25.0 to 122 kW and a nominal heating capacity range from 26.9 to 120 kW.
All units are equipped with two scroll compressors fitted in tandem for adapting to partial system loads.
The general operation status of the machine is continuously under the control of an IHM controller.
The SysAquaL and SysAquaH units can operate without water tank, thanks to the lHM controller that implements an auto- adaptative control logic ensuring a total protection of the compressors at different load or water volume conditions. The minimum water volume requested in cooling mode is 3.5 litres per kW for application air conditioning and 10 litres per kW for application process.
In heating mode, 12.5 litres per kW are recommended in order to guarantee homogeneous temperatures during the defrosting cycles (comfort and energysavings). A fan speed controller can be also supplied as factory-fitted option to authorize the unit to operate in cooling mode at low ambient temperature.
SysAquaL and SysAquaH units can be supplied in several versions:
- STD (Standard) version : lncludes a low noise (LS) acoustical performance.
- XLN (Extra low noise) version : Obtained by the installation of acoustic box around compressors.
- HPF version : lncreases the static pressure.
Cabinet and structure
The cabinet and structure of the unit are of heavy duty galvanized steel.All galvanized steel components are individually painted by a special painting process before the assembly of the unit. This painting system performs a homogeneous protection to the corrosion.The painting is a polyester powder based type, coloured in RAL 7040.
The units SysAquaL/SysAquaH are suitable for outdoor installation, directly on the building roof or at the ground level.
Compressors
Each unit is equipped with two scroll compressors fitted on a rail and assembled together to form tandem compressors.
The compressors are then mounted on rubber pads in order to eliminate noise and vibration transmissions. The compressor motor shave a direct startup. Each motor is cooled by the refrigerant gas and is equipped with an overload protection.
A phase sequence monitor is supplied as standard.
Evaporator
The evaporator is consisting of a stainless steel plate heat exchanger insulated with closed cell synthetic foam. lt is protected by an antifreeze electric heater to ensure a good protection against freezing at low ambient temperature (-10 °C min.) when the unit is switchedoff.
Maximum working pressure is 10 bar at water side and 45 at refrigerant side.
Systemair SYSAQUA90.H.1P-SP.WPS.AVM
Модель: SYSAQUA90.H.1P-SP.WPS.AVM
Артикул: 372047
SysAquaL/SysAquaH 25 to 125 have been designed and optimized to operate with R410A refrigerant fluid. They are of single refrigerant circuit type.
They are available in cooling only (SysAquaL) and heat pump (SysAquaH) versions.
Each versions consists of 11 sizes (25, 30, 35, 40, 45, 55, 65, 75, 90, 105 & 125) and covers a nominal cooling capacity range from 25.0 to 122 kW and a nominal heating capacity range from 26.9 to 120 kW.
All units are equipped with two scroll compressors fitted in tandem for adapting to partial system loads.
The general operation status of the machine is continuously under the control of an IHM controller.
The SysAquaL and SysAquaH units can operate without water tank, thanks to the lHM controller that implements an auto- adaptative control logic ensuring a total protection of the compressors at different load or water volume conditions. The minimum water volume requested in cooling mode is 3.5 litres per kW for application air conditioning and 10 litres per kW for application process.
In heating mode, 12.5 litres per kW are recommended in order to guarantee homogeneous temperatures during the defrosting cycles (comfort and energysavings). A fan speed controller can be also supplied as factory-fitted option to authorize the unit to operate in cooling mode at low ambient temperature.
SysAquaL and SysAquaH units can be supplied in several versions:
- STD (Standard) version : lncludes a low noise (LS) acoustical performance.
- XLN (Extra low noise) version : Obtained by the installation of acoustic box around compressors.
- HPF version : lncreases the static pressure.
Cabinet and structure
The cabinet and structure of the unit are of heavy duty galvanized steel.All galvanized steel components are individually painted by a special painting process before the assembly of the unit. This painting system performs a homogeneous protection to the corrosion.The painting is a polyester powder based type, coloured in RAL 7040.
The units SysAquaL/SysAquaH are suitable for outdoor installation, directly on the building roof or at the ground level.
Compressors
Each unit is equipped with two scroll compressors fitted on a rail and assembled together to form tandem compressors.
The compressors are then mounted on rubber pads in order to eliminate noise and vibration transmissions. The compressor motor shave a direct startup. Each motor is cooled by the refrigerant gas and is equipped with an overload protection.
A phase sequence monitor is supplied as standard.
Evaporator
The evaporator is consisting of a stainless steel plate heat exchanger insulated with closed cell synthetic foam. lt is protected by an antifreeze electric heater to ensure a good protection against freezing at low ambient temperature (-10 °C min.) when the unit is switchedoff.
Maximum working pressure is 10 bar at water side and 45 at refrigerant side.
Systemair SYSCREW 1000 Air CO
Модель: SYSCREW
Артикул: CWA1000CO
Technical feature
• 21 sizes• Cooling capacity from 295 to 1395 [kW]
• 3 fans versions: STD (Standard), HT (High Temperature), HPF (High Pressure Fans)
• Acoustic versions: STD (Standard), S (Super Low Noise)
• Two refrigerant circuits
• 2 screw compressors
• Coated microchannel coils
Standard features
• Phase sequence control• Electronic expansion valve
• Control circuit transformer
• Control data logger
• Antifreeze electrical heater
• Modbus protocol kit for BMS
• E-coating for Microchannel and Al/Cu coils
Factory installed options
• Lonwork protocol kit for BMS• Bacnet protocol kit for BMS
• Compressors soft-starter
• Fan speed control for low ambient operation
• Double set-point
• Power factor correction capacitors
• Automatic circuit breaker
• HP & LP gauges
• Compressor suction valves
• Compressor oil level switch
• Compressor stepless control
• Condenser coils with copper fins
• Finned tubes coils
• Chiller grilles
• Compressor acoustic box
• Desuperheater
• Total heat recovery (TR)
• On board hydro kits 1P/2P without tank
Field installed accessories
• Remote ON/OFF control• Remote keyboard panel
• Sequencer, up to max four units
• Anti-vibration spring
• Water flow switch
• Water pressure switch
• Water filter
• Remote hydro kits with 2500 [l] buffer tank, 1 or 2 low or high pressure pump(s), relevant accessories and with or without antifreeze heater
Systemair SYSCREW 1070 Air CO
Модель: SYSCREW
Артикул: CWA1070CO
Technical feature
• 21 sizes• Cooling capacity from 295 to 1395 [kW]
• 3 fans versions: STD (Standard), HT (High Temperature), HPF (High Pressure Fans)
• Acoustic versions: STD (Standard), S (Super Low Noise)
• Two refrigerant circuits
• 2 screw compressors
• Coated microchannel coils
Standard features
• Phase sequence control• Electronic expansion valve
• Control circuit transformer
• Control data logger
• Antifreeze electrical heater
• Modbus protocol kit for BMS
• E-coating for Microchannel and Al/Cu coils
Factory installed options
• Lonwork protocol kit for BMS• Bacnet protocol kit for BMS
• Compressors soft-starter
• Fan speed control for low ambient operation
• Double set-point
• Power factor correction capacitors
• Automatic circuit breaker
• HP & LP gauges
• Compressor suction valves
• Compressor oil level switch
• Compressor stepless control
• Condenser coils with copper fins
• Finned tubes coils
• Chiller grilles
• Compressor acoustic box
• Desuperheater
• Total heat recovery (TR)
• On board hydro kits 1P/2P without tank
Field installed accessories
• Remote ON/OFF control• Remote keyboard panel
• Sequencer, up to max four units
• Anti-vibration spring
• Water flow switch
• Water pressure switch
• Water filter
• Remote hydro kits with 2500 [l] buffer tank, 1 or 2 low or high pressure pump(s), relevant accessories and with or without antifreeze heater
Systemair SYSCREW 1070 WATER EVO CO
Модель: SYSCREW
Артикул: CWWE1070CO
Технічні особливості
• Чилери з водяним охолодженням конденсатора
• Теплові насоси з реверсивним водяним контуром
• Агрегати без конденсатора
• 15 розмірів
• Холодопродуктивність для версії CO від 446 до 1575 кВт
• Холодопродуктивність для версії HP від 385 до 1347 кВт
• Теплопродуктивність для версії HP від 488 до 1715 кВт
• Холодопродуктивність для версії RC від 386 до 1357 кВт
• Один холодильний контур (розміри від 440 до 770)
• Два холодильні контури (розміри від 860 до 1550)
• Два гвинтові компрессори
• Кожухотрубні теплообмінники
3 виконання:
• CO (з водяним охолодженням конденсатора)
• HP (з реверсивним водяним контуром)
• RC (без конденсатора)
• ВС (для охолодження розчину нижче 0С)
2 акустичні версії:
• - (стандартна)
• S (супер низькошумна)
Додаткове обладнання, встановлене стандартно
• Контрль перекосу фаз
• Електронний розширювальний клапан
• Трансформатор ланцюга управління
• Пристрій реєстрації даних
• Інтерфейс Modbus для системи BMS
Додаткові аксесуари, що встановлюються на заводі
• Мережний інтерфейс Lonwork для системи BMS (RS485/ETHERNET)
• Інтерфейс Bacnet для системи BMS (RS485 / ETHERNET)
• Плавний запуск компресора
• Подвійна температура температури
• Модем GSM
• Автоматичний вимикач
• Комплект манометрів високого та низького тиску
• Клапани на лінії всмоктування компресора
• Реле рівня мастила компресора
• Безступінчасте керування компресора
• Конденсатор Cu/Ni
• Конденсатор для артазіанської води
• Пароохолоджувач
• Повна рекуперація теплоти (версія TR)
Додаткові аксесуари, що постачаються окремо
• Дротовий пульт дистанційного керування (Увімк./Вимк.)
• Панель дистанційного керування
• Мережевий модуль Sequencer для керування групою до 4 чилерів
• Пружинні антивібраційні опори
• Реле протоки
• Реле тиску
• Водяний фільтр
• Можливість підключення зовнішнього гідравлічного модуля HPT
Systemair SYSCREW 1070 WATER EVO HP
Модель: SYSCREW
Артикул: CWWE1070HP
Technical feature
• 15 sizes• Cooling capacity from 410 to 1460 [kW]
• Heating capacity from 470 to 1650 [kW]
• Acoustic versions: STD (Basic Low Noise), S (Super Low Noise)
• One refrigerant circuits (from 440 to 770 size)
• Two refrigerant circuits (from 860 to 1550 size)
• Twin screw compressors
• Shell & tubes heat exchangers
Standard features
• Phase sequence control• Electronic expansion valve
• Control circuit transformer
• Control data logger
• Modbus protocol kit for BMS
Factory installed options
• Lonwork protocol kit for BMS (RS485 / ETHERNET)• Bacnet protocol kit for BMS (RS485 / ETHERNET)
• Compressor soft-starter
• Double set-point
• Power factor correction capacitors
• Automatic circuit breaker
• HP & LP gauges
• Compressor suction valves
• Compressor oil level switch
• Compressor liquid injection
• Compressor stepless control
• Cu/Ni condensers
• Condensers for well application
• Desuperheater
• Total heat recovery (TR)
Field installed accessories
• Remote ON/OFF control• Remote keyboard panel
• Sequencer, up to max four units
• Anti-vibration spring
• Water flow switch
• Water pressure switch
• Water filter
• Remote hydro kits with buffer tank, 1 or 2 low or high pressure pump(s), relevant accessories and with or without antifreeze heater
Systemair SYSCREW 1130 Air CO
Модель: SYSCREW
Артикул: CWA1130CO
Technical feature
• 21 sizes• Cooling capacity from 295 to 1395 [kW]
• 3 fans versions: STD (Standard), HT (High Temperature), HPF (High Pressure Fans)
• Acoustic versions: STD (Standard), S (Super Low Noise)
• Two refrigerant circuits
• 2 screw compressors
• Coated microchannel coils
Standard features
• Phase sequence control• Electronic expansion valve
• Control circuit transformer
• Control data logger
• Antifreeze electrical heater
• Modbus protocol kit for BMS
• E-coating for Microchannel and Al/Cu coils
Factory installed options
• Lonwork protocol kit for BMS• Bacnet protocol kit for BMS
• Compressors soft-starter
• Fan speed control for low ambient operation
• Double set-point
• Power factor correction capacitors
• Automatic circuit breaker
• HP & LP gauges
• Compressor suction valves
• Compressor oil level switch
• Compressor stepless control
• Condenser coils with copper fins
• Finned tubes coils
• Chiller grilles
• Compressor acoustic box
• Desuperheater
• Total heat recovery (TR)
• On board hydro kits 1P/2P without tank
Field installed accessories
• Remote ON/OFF control• Remote keyboard panel
• Sequencer, up to max four units
• Anti-vibration spring
• Water flow switch
• Water pressure switch
• Water filter
• Remote hydro kits with 2500 [l] buffer tank, 1 or 2 low or high pressure pump(s), relevant accessories and with or without antifreeze heater
Systemair SYSCREW 1130 WATER EVO CO
Модель: SYSCREW
Артикул: CWWE1130CO
Технічні особливості
• Чилери з водяним охолодженням конденсатора
• Теплові насоси з реверсивним водяним контуром
• Агрегати без конденсатора
• 15 розмірів
• Холодопродуктивність для версії CO від 446 до 1575 кВт
• Холодопродуктивність для версії HP від 385 до 1347 кВт
• Теплопродуктивність для версії HP від 488 до 1715 кВт
• Холодопродуктивність для версії RC від 386 до 1357 кВт
• Один холодильний контур (розміри від 440 до 770)
• Два холодильні контури (розміри від 860 до 1550)
• Два гвинтові компрессори
• Кожухотрубні теплообмінники
3 виконання:
• CO (з водяним охолодженням конденсатора)
• HP (з реверсивним водяним контуром)
• RC (без конденсатора)
• ВС (для охолодження розчину нижче 0С)
2 акустичні версії:
• - (стандартна)
• S (супер низькошумна)
Додаткове обладнання, встановлене стандартно
• Контрль перекосу фаз
• Електронний розширювальний клапан
• Трансформатор ланцюга управління
• Пристрій реєстрації даних
• Інтерфейс Modbus для системи BMS
Додаткові аксесуари, що встановлюються на заводі
• Мережний інтерфейс Lonwork для системи BMS (RS485/ETHERNET)
• Інтерфейс Bacnet для системи BMS (RS485 / ETHERNET)
• Плавний запуск компресора
• Подвійна температура температури
• Модем GSM
• Автоматичний вимикач
• Комплект манометрів високого та низького тиску
• Клапани на лінії всмоктування компресора
• Реле рівня мастила компресора
• Безступінчасте керування компресора
• Конденсатор Cu/Ni
• Конденсатор для артазіанської води
• Пароохолоджувач
• Повна рекуперація теплоти (версія TR)
Додаткові аксесуари, що постачаються окремо
• Дротовий пульт дистанційного керування (Увімк./Вимк.)
• Панель дистанційного керування
• Мережевий модуль Sequencer для керування групою до 4 чилерів
• Пружинні антивібраційні опори
• Реле протоки
• Реле тиску
• Водяний фільтр
• Можливість підключення зовнішнього гідравлічного модуля HPT
Systemair SYSCREW 1130 WATER EVO HP
Модель: SYSCREW
Артикул: CWWE1130HP
Technical feature
• 15 sizes• Cooling capacity from 410 to 1460 [kW]
• Heating capacity from 470 to 1650 [kW]
• Acoustic versions: STD (Basic Low Noise), S (Super Low Noise)
• One refrigerant circuits (from 440 to 770 size)
• Two refrigerant circuits (from 860 to 1550 size)
• Twin screw compressors
• Shell & tubes heat exchangers
Standard features
• Phase sequence control• Electronic expansion valve
• Control circuit transformer
• Control data logger
• Modbus protocol kit for BMS
Factory installed options
• Lonwork protocol kit for BMS (RS485 / ETHERNET)• Bacnet protocol kit for BMS (RS485 / ETHERNET)
• Compressor soft-starter
• Double set-point
• Power factor correction capacitors
• Automatic circuit breaker
• HP & LP gauges
• Compressor suction valves
• Compressor oil level switch
• Compressor liquid injection
• Compressor stepless control
• Cu/Ni condensers
• Condensers for well application
• Desuperheater
• Total heat recovery (TR)
Field installed accessories
• Remote ON/OFF control• Remote keyboard panel
• Sequencer, up to max four units
• Anti-vibration spring
• Water flow switch
• Water pressure switch
• Water filter
• Remote hydro kits with buffer tank, 1 or 2 low or high pressure pump(s), relevant accessories and with or without antifreeze heater